Additional Equipment Hydraulic System Maximum Permissible Oil Withdrawal To operate large hydraulic cylinders such as those used on tipping trailers, 10 liters (2.6 U.S. gal.) of oil may be drawn from the transmission case through the connecting lines. This figure applies when the oil in the transmission case is at the minimum mark on the sight-glass. If the oil is up to the maximum mark, a further 10 liters (2.6 U.S. gal.) may be withdrawn. LX1044994 —UN—12JUN08 Never perform heavy jobs such as towing, operating a PTO or driving fast when withdrawal results in the oil level dropping below the minimum mark. If required, a further 15 liters (4.0 U.S.
gal.) may be added to the transmission case; this increases the amount that may be withdrawn accordingly. If oil level is above the maximum mark on the sight-glass, do NOT perform any transport tasks at speeds above 40 km/h (25 mph). A—Minimum mark B—Maximum mark During oil withdrawal, the tractor should not be inclined in any direction by more than 18°. If the tractor is inclined by more than 18°, only a correspondingly lower quantity of oil may be withdrawn. For refilling, use only John Deere HY-GARD® Transmission and Hydraulic Oil or its equivalent. HY-GARD is a trademark of Deere & Company. OU12401,00019E5 -19-12JUN08-1/1 Oil Withdrawal with Hydraulic Motor IMPORTANT:
Never regulate the flow rate by means of an external valve. Always use flow control valves (A). LX1037211 —UN—21OCT05 The maximum rate of transmission/hydraulic oil flow that can be achieved is 109 l/min (28.8 gpm). Shut off engine. Connect the hydraulic hose from the hydraulic motor. Comply with the symbols on the couplers. Start the engine. Move the control lever to lower position. To switch off the hydraulic motor, move the control lever to the float position. Shut off the engine and take out the hydraulic hose. in back-pressure causing damage to the hydraulic motor and hoses. IMPORTANT:
Do not move the control lever to the neutral position, as this may result OU12401,0001B6C -19-12FEB09-1/1 70-13 030612 PN=184