John Deere OMAL171363 (7430 and 7530) — Height-Adjustable Trailer Hitch

Additional Equipment Other Replacing with drawbar (old version) The piton-fix tow hitch or the ball-type tow-hitch can easily be removed, e.g. to install a drawbar. Pull out locking pins (A), take out retaining pins (B) and pull support (C) out to the rear. LX1041426 —UN—10NOV06 A—Locking Pin B—Retaining Pin C—Support OU12401,000153C -19-10AUG11-3/5 Ball-type tow hitch (new version) For attaching an implement, pull handle (A) upward and slide to the right. This will open the locking device and retainer (C) can be moved upwards. After attaching the implement, push down retainer (C) and engage handle (A) in its initial position.

Handle (A) will only engage properly when the locking pin is pushed all the way to the left. If necessary, use an 8 mm (0.3 in.) hex. socket wrench to adjust the retainer set screw (B) to the eyelet of the trailed implement. Then tighten the lock nut to 300 Nm (220 lb-ft) using a 30 mm (1.2 in.) wrench. LX1049992 —UN—27JUL11 A—Handle B—Set Screw C—Retainer OU12401,000153C -19-10AUG11-4/5 Replacing with drawbar (new version) The piton-fix tow hitch or the ball-type tow-hitch can easily be removed, e.g. to install a drawbar. Pull out locking pins (A), take out retaining pins (B) and pull support (C) out to the rear.

LX1049993 —UN—27JUL11 A—Locking Pin B—Retaining Pin C—Support OU12401,000153C -19-10AUG11-5/5 71-3 030612 PN=188