Fuel, Lubricants, Hydraulic Oil and Coolant Handling and Storing Diesel Fuel CAUTION: Reduce the risk of fire. Handle fuel carefully. DO NOT fill the fuel tank when engine is running. DO NOT smoke while you fill the fuel tank or service the fuel system. When using biodiesel fuel, the fuel filter may require more frequent replacement due to premature plugging. Check engine oil level daily prior to starting engine. A rising oil level may indicate fuel dilution of the engine oil. Fill the fuel tank at the end of each day's operation to prevent water condensation and freezing during cold weather. IMPORTANT: The fuel tank is vented through the filler cap.
If a new filler cap is required, always replace it with an original vented cap. Keep all storage tanks as full as practicable to minimize condensation. When fuel is stored for an extended period or if there is a slow turnover of fuel, add a fuel conditioner to stabilize the fuel and prevent water condensation. Contact your fuel supplier for recommendations. Ensure that all fuel tank caps and covers are installed properly to prevent moisture from entering. Monitor water content of the fuel regularly. DX,FUEL4 -19-14APR11-1/1 Bio-Diesel Fuel Consult your local fuel distributor for properties of the bio-diesel fuel available in your area.
Consult you John Deere dealer before using bio-diesel fuel. Bio-diesel fuels may be used ONLY if the bio-diesel fuel properties meet the latest edition of ASTM D6751, EN 14214 or equivalent specification. OU12401,00013D7 -19-03APR06-1/1 80-2 030612 PN=199