Fuel, Lubricants, Hydraulic Oil and Coolant Transmission and Hydraulic Oil Use oil with a viscosity based on the expected air temperature range during the period between oil changes. The following oils are preferred: John Deere HY-GARD™ John Deere HY-GARD LOW VISCOSITY Other oils may be used if they meet one or more of the following: John Deere Standard JDM J20C John Deere Standard JDM J20D Use John Deere BIO-HY-GARD II™ 1 or BIO-HY-GARD™ 1 when a biodegradable fluid is required. IMPORTANT: On tractors with AutoPowr: Only John Deere HY-GARD or John Deere BIO-HY-GARD II may be used. LX1033631 —UN—29APR04 Do NOT use HY-GARD LOW VISCOSITY. Do NOT use BIO-HY-GARD.
HY-GARD is a trademark of Deere & Company. BIO-HY-GARD II is a trademark of Deere & Company. BIO-HY-GARD is a trademark of Deere & Company. 1 BIO-HY-GARD II meets or exceeds the minimum biodegradability of 80 % within 21 days according to CEC L-33-A-93 test method. BIO-HY-GARD meets or exceeds the minimum biodegradability of 80 % within 21 days according to CEC L-33-T-82 test method. These oils should not be mixed with mineral oils because this reduces the biodegradability and makes proper oil recycling impossible. OU12401,000198E -19-12FEB08-1/1 80-5 030612 PN=202