Fuel, Lubricants, Hydraulic Oil and Coolant Front-Wheel Drive Axle Oil Use oil with a viscosity based on the expected air temperature range during the period between oil changes. The following oil is preferred. John Deere HY-GARD™ Other oils may be used if they meet the following: John Deere Standard JDM J20C Use one of the following oils when a biodegradable fluid is required: John Deere BIO-HY-GARD II™ 1 or BIO-HY-GARD™ 1 NOTE: Do NOT use BIO-HY-GARD on braked axles. LX1033632 —UN—29APR04 HY-GARD is a trademark of Deere & Company. BIO-HY-GARD II is a trademark of Deere & Company. BIO-HY-GARD is a trademark of Deere & Company.
1 BIO-HY-GARD II meets or exceeds the minimum biodegradability of 80 % within 21 days according to CEC L-33-A-93 test method. BIO-HY-GARD meets or exceeds the minimum biodegradability of 80 % within 21 days according to CEC L-33-T-82 test method. These oils should not be mixed with mineral oils because this reduces the biodegradability and makes proper oil recycling impossible. LX,OILFA1 -19-30APR04-1/1 80-6 030612 PN=203