Fuel, Lubricants, Hydraulic Oil and Coolant Grease Use grease based on NLGI consistency numbers and the expected air temperature range during the service interval. John Deere SD Polyurea Grease is preferred. The following greases are also recommended: John Deere HD Lithium Complex Grease John Deere HD Water Resistant Grease John DeereGREASE-GARD™ Other greases may be used if they meet the following: NLGI Performance Classification GC-LB IMPORTANT: Some types of grease thickeners are not compatible with others. Consult your grease supplier before mixing different types of grease.
TS1673 —UN—31OCT03 Greases for Air Temperature Ranges GREASE-GARD is a trademark of Deere & Company DX,GREA1 -19-14APR11-1/1 Oil Filters Filtration of oils is critical to proper operation and lubrication. Always change filters regularly as specified in this manual. Use filters meeting John Deere performance specifications. DX,FILT -19-18MAR96-1/1 Lubricant Storage Your equipment can operate at top efficiency only when clean lubricants are used. Make certain that all containers are properly marked to identify their contents. Use clean containers to handle all lubricants. Properly dispose of all old containers and any residual lubricant they may contain.
Store lubricants and containers in an area protected from dust, moisture, and other contamination. Store containers on their side to avoid water and dirt accumulation. DX,LUBST -19-11APR11-1/1 Mixing of Lubricants In general, avoid mixing different brands or types of oil. Oil manufacturers blend additives in their oils to meet certain specifications and performance requirements. Mixing different oils can interfere with the proper functioning of these additives and degrade lubricant performance. Consult your John Deere dealer to obtain specific information and recommendations. DX,LUBMIX -19-18MAR96-1/1 80-7 030612 PN=204