John Deere OMAL171363 (7430 and 7530) — John Deere COOL-GARD™ II Coolant Extender

Fuel, Lubricants, Hydraulic Oil and Coolant Alternative and Synthetic Lubricants Conditions in certain geographical areas may require lubricant recommendations different from those printed in this manual. The temperature limits and service intervals shown in this manual apply to both conventional and synthetic lubricants. Some John Deere brand coolants and lubricants may not be available in your location. Re-refined base stock products may be used if the finished lubricant meets the performance requirements. Consult your John Deere dealer to obtain information and recommendations. Synthetic lubricants may be used if they meet the performance requirements as shown in this manual.

DX,ALTER -19-11APR11-1/1 Heavy Duty Diesel Engine Coolant The engine cooling system is filled to provide year-round protection against corrosion and cylinder liner pitting, and winter freeze protection to -37°C (-34°F). If protection at lower temperatures is required, consult your John Deere dealer for recommendations. Is formulated with a quality nitrite-free additive package. Provides cylinder liner cavitation protection according to either the John Deere Cavitation Test Method or a fleet study run at or above 60% load capacity Protects the cooling system metals (cast iron, aluminum alloys, and copper alloys such as brass) from corrosion The following engine coolants are preferred:

John Deere COOL-GARD™II Premix John Deere COOL-GARD II PG Premix The additive package must be part of one of the following coolant mixtures: ethylene glycol or propylene glycol base prediluted (40—60%) heavy duty coolant ethylene glycol or propylene glycol base heavy duty coolant concentrate in a 40—60% mixture of concentrate with quality water Use John Deere COOL-GARD II PG Premix when a non-toxic coolant formulation is required. Additional Recommended Coolants The following engine coolant is also recommended: John Deere COOL-GARD II Concentrate in a 40–60% mixture of concentrate with quality water.

Water Quality John Deere COOL-GARD II Premix, COOL-GARD II PG Premix, and COOL-GARD II Concentrate coolants do not require use of supplemental coolant additives. Water quality is important to the performance of the cooling system. Distilled, deionized, or demineralized water is recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate. Other Coolants IMPORTANT: Do not use cooling system sealing additives or antifreeze that contains sealing additives. John Deere COOL-GARD II and COOL-GARD II PG coolants might not be available in the geographical area where service is performed. Do not mix ethylene glycol and propylene glycol base coolants.

If these coolants are unavailable, use a coolant concentrate or prediluted coolant intended for use with heavy duty diesel engines and with a minimum of the following chemical and physical properties: Do not use coolants that contain nitrites. COOL-GARD is a trademark of Deere & Company DX,COOL3 -19-14APR11-1/1 80-8 030612 PN=205