John Deere OMAL171363 (7430 and 7530) — Oilscan™ and CoolScan™

Fuel, Lubricants, Hydraulic Oil and Coolant Testing Diesel Engine Coolant Maintaining adequate concentrations of glycol and inhibiting additives in the coolant is critical to protect the engine and cooling system against freezing, corrosion, and cylinder liner erosion and pitting. Add only the recommended concentration of John Deere COOL-GARD II Coolant Extender. DO NOT add more than the recommended amount. Test the coolant solution at intervals of 12 months or less and whenever excessive coolant is lost through leaks or overheating.

When Using Nitrite-Containing Coolants Compare the test strip results to the supplemental coolant additive (SCA) chart to determine the amount of inhibiting additives in your coolant and whether more John Deere Liquid Coolant Conditioner should be added. Coolant Test Strips Coolant test strips are available from your John Deere dealer. These test strips provide a simple, effective method to check the freeze point and additive levels of your engine coolant. Add only the recommended concentration of John Deere Liquid Coolant Conditioner. DO NOT add more than the recommended amount.

When Using John Deere COOL-GARD II Coolant Analysis John Deere COOL-GARD II Premix™, COOL-GARD II PG Premix and COOL-GARD II Concentrate are maintenance free coolants for up to six years or 6000 hours of operation, provided that the cooling system is topped off using only John Deere COOL-GARD II Premix or COOL-GARD II PG premix. Test the coolant condition annually with coolant test strips designed for use with John Deere COOL-GARD II coolants. If the test strip chart indicates that additive is required, add John Deere COOL-GARD II Coolant Extender as directed. For a more thorough evaluation of your coolant, perform a coolant analysis.

The coolant analysis can provide critical data such as freezing point, antifreeze level, pH, alkalinity, nitrite content (cavitation control additive), molybdate content (rust inhibitor additive), silicate content, corrosion metals, and visual assessment. Contact your John Deere dealer for more information on coolant analysis. COOL-GARD is a trademark of Deere & Company DX,COOL9 -19-11APR11-1/1 80-11 030612 PN=208