Fuel, Lubricants, Hydraulic Oil and Coolant Additional Information About Diesel Engine Coolants and John Deere LIQUID COOLANT CONDITIONER Engine coolants are a combination of three chemical components: ethylene glycol or propylene glycol antifreeze, inhibiting coolant additives, and quality water. Avoid Automotive-type Coolants Never use automotive-type coolants (such as those meeting ASTM D3306). These coolants do not contain the correct additives to protect heavy-duty diesel engines. They often contain a high concentration of silicates and may damage the engine or cooling system.
Do not treat an automotive engine coolant with a supplemental coolant additive because the high concentration of additives can result in additive fallout. Coolant Specifications Some products, including John Deere COOL-GARD™ Premix coolant, are fully formulated coolants that contain all three components in their correct concentrations. Do not add an initial charge of supplemental coolant additives or water to John Deere COOL-GARD Premix. John Deere COOL-GARD Concentrate contains both ethylene glycol and inhibiting coolant additives. Mix COOL-GARD Concentrate with quality water, but do not add an initial charge of supplemental coolant additives.
Water Quality Water quality is important to the performance of the cooling system. Distilled, deionized, or demineralized water is recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate. All water used in the cooling system should meet the following minimum specifications for quality: Replenish Coolant Additives Some coolant additives will gradually deplete during engine operation. Periodic replenishment of inhibitors is required, even when John Deere COOL-GARD Premix, COOL-GARD Concentrate, or COOL-GARD PG Premix is used. Follow the recommendations in this manual for the use of supplemental coolant additives.
Why use John Deere LIQUID COOLANT CONDITIONER? Freeze Protection Operating without proper coolant additives will result in increased corrosion, cylinder liner erosion and pitting, and other damage to the engine and cooling system. A simple mixture of ethylene glycol or propylene glycol and water will not give adequate protection. The relative concentrations of glycol and water in the engine coolant determine its freeze protection limit. John Deere LIQUID COOLANT CONDITIONER is an additive system designed to reduce corrosion, erosion, and pitting when used with nitrite-containing diesel engine coolants such as John Deere COOL-GARD Premix, COOL-GARD Concentrate, and COOL-GARD PG Premix.
Maintaining John Deere COOL-GARD coolants with John Deere LIQUID COOLANT CONDITIONER provides optimum protection for up to 5 years or 5000 hours of operation. DO NOT use a coolant-water mixture greater than 60% ethylene glycol or 60% propylene glycol. COOL-GARD is a trademark of Deere & Company DX,COOL7 -19-03NOV08-1/1 80-10 030612 PN=207 Chlorides Sulfates Total dissolved solids Total hardness pH 5.5 to 9.0 Ethylene Glycol Freeze Protection Limit 40% -24°C (-12°F) 50% -37°C (-34°F) 60% -52°C (-62°F) Propylene Glycol Freeze Protection Limit 40% -21°C (-6°F) 50% -33°C (-27°F) 60% -49°C (-56°F)