John Deere OMAL171363 (7430 and 7530) — Check Oil Level in MFWD Axle Housing

Service / Every 250 Hours Lubricating the Front Axle and U.j. Shafts IMPORTANT: Carry out this service after every ten hours of operation when working under very wet and muddy conditions. Apply John Deere multi-purpose grease to the grease fittings on the final drives (two on each drive), on the axle bridge (with suspended axle, one fitting on each side of tractor), on the rear drive shaft and the front drive shaft (suspended axle only). LX1038360 —UN—18MAY06 LX1038361 —UN—31MAY06 IMPORTANT: Thoroughly clean all grease fittings prior to greasing. Replace damaged grease fittings immediately.

Final drive Suspended axle LX1038362 —UN—07OCT10 LX1038363 —UN—18MAY06 Drive shaft (rear) LX1038364 —UN—18MAY06 Drive shaft (front) OU12401,0001416 -19-16MAY06-1/1 95-2 030612 PN=222