Service / Every 250 Hours Check for Wear at Ball-Type Tow Hitch CAUTION: Parts that have reached or exceeded their wear limit must be replaced with new parts. Check gap (a) at catch. LX1041483 —UN—19DEC06 Specification Gap at catch—Maximum permissible clearance................................................................... 4.0 mm 0.16 in. Check diameter (b) of the ball. Specification Ball diameter—Wear limit or minimum diameter.................................................................. 78.0 mm 3.07 in. OU12401,0001545 -19-19DEC06-1/1 Check the Drawbar for Wear CAUTION: Parts that have reached or exceeded their wear limit must be replaced with new parts.
Check diameter (a) of the pin. LX1050828 —UN—08OCT10 Specifications for Cat. 2 hitch pins with a nominal diameter of 31.5 mm (1.24 in.): Specification Drawbar, Pin—Wear Limit or Minimum Diameter..................................................................................... 29.5 mm 1.16 in. Specifications for Cat. 3 hitch pins with a nominal diameter of 40.0 mm (1.57 in.): Specification Drawbar, Pin—Wear Limit or Minimum Diameter..................................................................................... 37.5 mm 1.48 in. Continued on next page LX24888,00005D2 -19-22FEB11-1/2 95-13 030612 PN=233