John Deere OMAL171363 (7430 and 7530) — Check Tow Hook on Pick-Up Hitch for Wear

Service / Every 250 Hours Check diameter (b) of the pin receiver hole. Specifications for Cat. 2 receiver hole with a nominal diameter of 33.0 mm (1.30 in.): Specification Top and bottom receiver holes (measured in direction of travel)—Wear Limit or Maximum Permissible Diameter....................................................... 35.0 mm (oval) 1.38 in. (oval) LX1050829 —UN—08OCT10 Specifications for Cat. 3 receiver hole with a nominal diameter of 41.0 mm (1.61 in.): Specification Top and bottom receiver holes (measured in direction of travel)—Wear Limit or Maximum Permissible Diameter....................................................... 43.0 mm (oval) 1.69 in.

(oval) LX24888,00005D2 -19-22FEB11-2/2 Check Tow Hook on Pick-Up Hitch for Wear CAUTION: Parts that have reached or exceeded their wear limit must be replaced with new parts. Check gap (a) at catch. LX1031446 —UN—24SEP03 Specification Gap at catch—Maximum permissible clearance................................................................. 10.0 mm 0.39 in. Continued on next page LX24888,00005D0 -19-13NOV06-1/2 95-14 030612 PN=234