John Deere OMAL171363 (7430 and 7530) — Check Tow Hook on Pick-Up Hitch for Wear

Service / Every 250 Hours Read the value (unit of measurement = kN) from pick-up hitch type plate. If the “D” value indicated on the type plate is 65 or less, observe the following minimum dimensions (A). Specification Tow hook, hook diameter (D = 65 or less)—Minimum value (A), diameter 1............................................................................ 43.5 mm 1.71 in. Minimum value (A), diameter 2.................................................................................. 42.0 mm 1.65 in. Minimum value (A), diameter 3.................................................................................. 40.5 mm 1.59 in.

LX1041808 —UN—27NOV06 If the value indicated on the type plate exceeds 65, observe the following minimum dimensions (A). Specification Tow hook, hook diameter (D = more than 65)—Minimum value (A), diameter 1.................................................................................. 45.0 mm 1.77 in. Minimum value (A), diameter 2.................................................................................. 43.5 mm 1.71 in. Minimum value (A), diameter 3.................................................................................. 42.0 mm 1.65 in. LX24888,00005D0 -19-13NOV06-2/2 95-15 030612 PN=235