John Deere OMAL171363 (7430 and 7530) — Secondary (Safety) Element

Service / As Required Engine Air Cleaner If a message appears at the CommandCenter saying that the engine air cleaner is contaminated, the air cleaner's primary element must be taken out and cleaned. The service interval may be extended briefly, e.g. until the next suitable opportunity. Provided the cleaner is serviced properly, this will not adversely affect its performance. LX1036537 —UN—20OCT05 The primary element can be cleaned up to five times. Thereafter, or at the latest after 1500 hours of operation (or 2 years), it must be replaced. Open the hood, pull lug (A) forward and swing catch (B) down. Fold cover (C) up. Pull the primary filter element out of the cleaner housing. IMPORTANT:

Never run the engine without the primary filter element! A—Lug B—Catch C—Cover LX1036538 —UN—20OCT05 OU12401,0001338 -19-18OCT05-1/1 Cleaning the Primary Filter Element When the element must be serviced in the field, tap it on the palm of your hand as a temporary measure. IMPORTANT: The guide ring must not be damaged or deformed. LX1026150 —UN—21MAY01 When you return to your service area, clean the filter element thoroughly, or replace it with a new one.

OU12401,0000933 -19-01MAY01-1/1 Cleaning a Dusty Element If tapping element does not remove dust, blow out dust with compressed air (not exceeding 600 kPa; 6 bar; 90 psi) by inserting nozzle inside the element and blowing from the inside of the filter to the outside. Replace element if air cleaner indicator light continues glowing after the element has been cleaned. LX1026151 —UN—21MAY01 OU12401,00102DE -19-01SEP01-1/1 125-1 030612 PN=249