John Deere OMAL171363 (7430 and 7530) — Replacing the Drive Belt

Service / As Required Replacing the Drive Belt NOTE: On tractors with front PTO, the drive belt must be replaced by your John Deere dealer. Pull the catch and lift the hood up. LX1026131 —UN—21MAY01 OU12401,00015DC -19-18DEC06-1/4 Relieving tension on the drive belt CAUTION: Disconnect negative cable from battery. Remove cover on tensioner roll (C). Turn tensioner roll cap screw using a 15 mm (19/32 in.) wrench (see arrow). The drive belt tensioner automatically goes back to tensioning position. LX1038342 —UN—18MAY06 The drive belt tensioner can be kept in relieved position as follows: Turn tensioner roll cap screw (see arrow) until bores (A) and (B) are aligned. Insert a 5 mm (0.2 in.) dia.

pin into the two bores that are in alignment. For tensioning, turn tensioner roll slightly to release metal pin and pull it from the bores. The drive belt tensioner returns to its tensioning position automatically. LX1027736 —UN—28AUG01 A—Bore (cam) B—Bore (base plate) C—Tensioner roll Continued on next page OU12401,00015DC -19-18DEC06-2/4 125-20 030612 PN=268