John Deere OMAL171363 (7430 and 7530) — Replacing the Drive Belt

Service / As Required Replacing the drive belt Take the six screws (A) out of the fan. Take drive belt (B) off over fan (C) and put on a new drive belt (see below for routing of belt). IMPORTANT: When installing, always use new corrugated-head screws. LX1034175 —UN—14JUN04 Tighten corrugated-head screws to the following specification. Specification Attachment to fan—Torque............................................................................22 – 28 Nm 16 21 lb-ft A—Corrugated-head screws B—Drive belt C—Fan LX1034176 —UN—14JUN04 Continued on next page OU12401,00015DC -19-18DEC06-3/4 125-21 030612 PN=269