John Deere OMAL171363 (7430 and 7530) — Electrical Sockets (If Equipped)

Operator's Cab Electrical Sockets (If Equipped) Signal socket Terminal Wire color Description 1 red Speed determined by radar 2 brown Speed of wheels LX1036245 —UN—03JUN05 3 orange Rear PTO speed 4 5 6 blue Power supply 7 black Ground The 7-terminal signal socket (A) is protected by a 30-amp fuse. Signal socket in lateral console ISOBUS socket in cab An implement monitor meeting ISO Standard 11783 may be connected to socket (C). LX1036246 —UN—03JUN05 3-terminal power outlet socket Terminal 15/30 of 3-terminal power outlet socket (B) is protected by a 30-amp fuse, and terminal 82 by a 10-amp fuse. Terminal 31 is ground.

3-terminal socket in rear cab wall Turn key in main (key) switch to the right to supply power to terminal 82. Terminal 15/30 is supplied with power even when the ignition is switched off. IMPORTANT: Electrical equipment requiring high current inputs may be operated, and the use of multiple power outlets is permitted, but the supply circuit must never be overloaded. Remember, total load comprises the sum of all the current consumers connected to the on-board circuit at any one time. This also applies if the consumers are connected to the on-board circuit at different sockets.

LX1041456 —UN—24NOV06 Sockets in cab frame A—Signal Socket B—3-Terminal Power Outlet Socket C—ISOBUS Socket Continued on next page OU12401,0001B92 -19-24AUG10-1/2 25-16 030612 PN=69