6 Suspension – 6.2.2 Wheel spindle 5 6.2.2 Wheel spindle page Wheel spindle bearing, checking 1 Machine in service position, see section B Safety . 2 Carefully pry up the O-ring. 3 Measure with feeler gauge between thrust bearing and thrust washer. Max. clearance: 1.5 mm. 6.2.3 Wheel hub page Wheel hub, checking 1 Clean the hub covers on the steering wheels. 2 Remove the hub cover. 3 Wipe grease off the hub cover and the hub nut. Handle as envi- ronmentally hazardous waste. 4 Bend up the lock washer's tabs, remove the lock nut and the lock washer. UDRF01.04GB Maintenance manual DRF 400–450