6 Suspension – 6.3 Tyre and rim system 9 DANGER Never stand directly opposite the tyre when deflat- ing or inflating. The lock ring and lock lugs may re- lease and shoot off when the pressure changes. Do not release air through the valve if tyre or rim is damaged. Drill holes in the tread to release the air. If the tyre explodes, the force of the explosion moves in the direction of the valve. Do not exceed the prescribed air pressure. When changing tyre or rim version, another air pressure may apply. Contact Kalmar Industries. 2 1 3 1 Check the rims. Check that the lock ring and lugs are installed correctly. In case of damage, the tyre and rim shall be dismantled and checked.
Check that there are no cracks in the rims' parts. 0022002 1. Lock ring 2. Rim flange 3. Rim bead seat taper 2 Check the air pressure in the tyres, see section Tyres, inflating page 17 . The pressure must be 1.0 MPa , inflate if necessary. 3 Check the tyres. Check for uneven and fast wear, this is caused by mechan- ical problems such as, e.g., uneven brake action. Make sure that such malfunctions are taken care of immediately. Remove penetrating objects such as crushed glass, pieces of wood, metal filings, etc. If the tyre is damaged, the wheel shall be dismantled and the tyre shall be changed, see Tyres, changing page 18 .
4 If the tyres and rims have no defects, check-tighten the wheel nuts. Tighten crosswise with torque, 400 Nm . 000384 Example: The figure shows inflation of drive wheel. UDRF01.04GB Maintenance manual DRF 400–450