Kaiyi UDRF01.04GB — 6.3 Tyre and rim system

10 6 Suspension – 6.3 Tyre and rim system page Tyre and rim system, removing (drive axle) Read the safety instructions before working with the tyre and rim, see Tyre and rim system, safety page 7 . 1 Lift the machine under the drive axle by the wheel in question. Support under the drive axle in a safe and adequate manner. 2 Deflate the tyre. If tyre and rim are in good condition, release air through the valve. If the tyre or rim is damaged, deflate the tyre by drilling a hole in the tread. 000384 3 Loosen the wheel nuts. 4 Secure the wheel with lifting equipment. 5 Remove nuts, washers and clamps. UDRF01.04GB Maintenance manual DRF 400–450