6 Suspension – 6.3 Tyre and rim system 13 3 Loosen the wheel nuts. 4 Secure the wheel with lifting equipment. 000383 5 Remove the wheel. Remove nuts, washers and clamps and pull out the wheel. 6 Lift away the wheel and place it in a safe manner. page Tyre and rim system, installing (drive axle) Read the safety instructions before working with the tyre and rim, see Tyre and rim system, safety page 7 . 1 Lift the inner wheel into place with lifting equipment. Rotate the wheel so that the guide lug enters the groove on the hub. UDRF01.04GB Maintenance manual DRF 400–450