20 6 Suspension – 6.3.2 Rims Checking cracks with penetrating fluid 1 Clean the area with cleaning fluid part no. 923626.0668. 2 Spray penetrating fluid part no. 923626.0669 on the cleaned area and let dry 10 min. 001704 001705 3 Wash off penetrating fluid with cleaning fluid part no. 923626.0668. Thoroughly wipe off the cleaning fluid with a drying cloth and let any remaining cleaning fluid evaporate. 4 Spray detection fluid part no. 923626.0670 on the area. 5 Let the sprayed area dry 1-2 hours. 1 2 6 Visually inspect the lock ring groove. If the tested area does not indicate linear or point-shaped cracks in the lock ring groove the rim is approved.
If the crack check indicates linear or point-shaped cracks the rim should be discarded. Example of cracks 1. Linear crack 2. Pointed crack UDRF01.04GB Maintenance manual DRF 400–450