10 7 Load handling – 7.3 Protruding 7.3 Protruding page Extension, function description Extension means to push the inner boom in and out in the outer boom. The inner boom is pushed in and out by the extension cylinder which is pressurized by Control valve lift, lower and extension. Ex- tension is controlled with Control lever (S815). 001110 Damping Damping means that the speed of functions is reduced automatical- ly near the end-positions. This results in less stress on the mechan- ical parts when stopping in the end-positions. Position sensors sense when damping should be activated.
When damping is activated, the control unit in question reduces the con- trol current to the solenoid valve for that function. Regeneration To increase the extension speed, oil from the rod side (2) is reused to the piston side (1), this is called regeneration. Engagement of re- generation is controlled by the control system. 1 2 000455 UDRF01.04GB Maintenance manual DRF 400–450 Condition Reference value Control switch Not activated Overloading system Boom out: passive