Kaiyi UDRF01.04GB — 7.5.7 Positioning chains

24 7 Load handling – 7.5.7 Positioning chains 4 If needed, adjust the distance by moving washers between the right and left 20-foot stop. The quantity of washers may not be changed. NOTE Note the distance that the stop is adjusted. Run out the spreading slightly so that it is possible to move the washers. 5 Remove the cover plates on the attachment's main beam. 6 If the 20-foot stops have been adjusted, the spreader chains should be adjusted equally (as much). NOTE Check the chain tensioner's vertical position so that the chain runs straight toward the chain wheel. 7 Start the engine and run out the spreading to the 40-foot posi- tion, and turn off the engine.

8 Check the C-C measurement between the twistlocks. C-C 40-foot: 11985 ± 3 mm 005105 UDRF01.04GB Maintenance manual DRF 400–450