Kaiyi UDRF01.04GB — 7.8 Levelling

7 Load handling – 7.8 Levelling 37 7.8 Levelling page Mechanical levelling, function description Mechanical levelling means that the attachment is angled in horizon- tal direction. This enables the machine to handle loads on uneven surfaces. 001117 The attachment's main beam is located in the sideshift frame. The clearance between the sideshift frame and the attachment's main beam allows a movement of approx. 5 ° which makes it possible to lift containers that lean in relation to the machine. It's the attach- ment's dead weight that adapts the attachment's angle to the con- tainer.

page Hydraulic levelling, function description Hydraulic levelling means that the sideshift frame is split and the parts are connected with four hydraulic cylinders. Hydraulic levelling increases mobility of the attachment. The hydraulic levelling has a passive position where the attachment floats freely and an active position where the angle can be controlled. Levelling can be locked by blocking the connection to the levelling cylinders. Passive levelling means that that an unloaded attachment is in a float position and adapts itself to the angle of the container to be lift- ed. The passive levelling transfers to active levelling as soon as the attachment is loaded.

Two pressure switches are activated when the pressure on the levelling cylinders' rod sides becomes too high. 001860 Active levelling means that levelling is controlled by pressurizing the hydraulic cylinders. Levelling is controlled with the control lever. Levelling is monitored by sequence valves that close when the feed pressure is high enough to put all cylinders in bottom position. UDRF01.04GB Maintenance manual DRF 400–450 Condition Reference value Control switch Not activated Overloading system Passive