20 9 Frame, body, cab and accessories – 9.5 Wiper/washer system 9.5 Wiper/washer system page Wiping/cleaning of windows, description On the cab, there are wipers for front and rear windshields as well as the roof windows. Its function is to clean the windows and to maintain good visibility from the cab. The wiper arm is attached to the wiper motor's shaft over a splined cone. The shaft is made of hardened steel and the wiper arm’s at- tachment is made of mild die cast material. B When installing, it’s very important to make sure that the splines are free from metal filings and similar.
Also, the nuts shall be tightened so hard that the splines are pressed into the attachment and act as a flange. Hold still the wiper arm when installing so that the torque isn’t transmitted to the motor, which may be damaged (16–20 Nm tightening torque). E C D 002214 A A. Wiper motor front B. Wiper motor roof C. Wiper motor rear D. Washer motor and reservoir E. Wiper front UDRF01.04GB Maintenance manual DRF 400–450