42 D Error codes – 2 Transmission UDRF01.04GB Maintenance manual DRF 400–450 Description Limitation Action Con- nec- tion and compo- nent Diag- nostic menu Function group Code Dan a code 43.08 43.08 Torque convert- er temperature exceeds 125 °C. The control unit protects the transmission and doesn't allow the temperature in the torque con- verter to exceed the limit value. The control unit locks the trans- mission in neu- tral, engine is restricted to 50% of max. rpm. Check cabling to sensor tempera- ture torque con- verter. Check sensor tem- perature torque converter.
D793/H3 - B758/ 766 TRANSM , menu 10 2.2.5 Sensor engine rpm and oil tem- perature transmission 50.00 50.00 Sensor oil pres- sure short- circuited to ground. Control unit acti- vates, Limp-home mode. Check cabling to sensor oil pressure (B253). Check sensor oil pressure (B253). D793/A:2 - B253 TRANSM , menu 10 2.6.2 Sensor oil pressure 50.01 50.01 Sensor oil pres- sure not con- nected or open circuit. Control unit acti- vates, Limp-home mode. Check cabling to sensor oil pressure (B253). Check sensor oil pressure (B253). D793/A:2 - B253 TRANSM , menu 10 2.6.2 Sensor oil pressure 51.00 51.00 Sensor engine rpm and oil temperature transmission short-circuited to ground.
The control unit limits the trans- mission's temper- ature measurement to the lowest value in its settings, which results in poor tempera- ture compensa- tion. Check cabling to sensor oil sump temperature trans- mission. Check Sensor en- gine rpm and oil temperature trans- mission (B758/ 766). D793/H3 - B758/ 766 TRANSM , menu 10 2.2.5 Sensor engine rpm and oil tem- perature transmission