50 D Error codes – 2 Transmission UDRF01.04GB Maintenance manual DRF 400–450 Description Limitation Action Con- nec- tion and compo- nent Diag- nostic menu Function group Code Dan a code 73.00 73.00 Electric mal- function gear 1/ 3, cables short- circuited to each other, sig- nal cable short- circuited to voltage or posi- tive cable short- circuited to ground. Control unit acti- vates, Limp-home mode. Check cabling to solenoid valve gear 1/3 (Y6067). D793/H1 - Y6067, J1 - Y6067 TRANSM , menu 8 2.3.4 Valve block trans- mission con- trol 73.01 73.01 Electric mal- function gear 1/ 3, open circuit or short- circuited volt- age. Control unit acti- vates, Limp-home mode.
Check cabling to solenoid valve gear 1/3 (Y6067). Check solenoid valve gear 1/3 (Y6067). D793/H1 - Y6067, J1 - Y6067 TRANSM , menu 8 2 Transmis- sion 73.02 73.02 Electric mal- function gear 1/ 3, control cur- rent above 1400mA. Control unit acti- vates, Limp-home mode. Check cabling to solenoid valve gear 1/3 (Y6067). Check solenoid valve gear 1/3 (Y6067). D793/H1 - Y6067, J1 - Y6067 TRANSM , menu 9 2 Transmis- sion 73.03 73.03 Electric mal- function sole- noid valve gear 1/3, control cur- rent outside ap- proved interval (incorrect im- pedance). Control unit acti- vates, Limp-home mode. Check cabling to solenoid valve gear 1/3 (Y6067). Check solenoid valve gear 1/3 (Y6067).
D793/H1 - Y6067, J1 - Y6067 TRANSM , menu 9 2 Transmis- sion 74.00 74.00 Analogue out- put signal 4 re- lated error: output signal short-circuited to ground. - - D793/ B01 - -