Kaiyi UDRF01.04GB — Error codes machine

56 D Error codes – 8 Control system UDRF01.04GB Maintenance manual DRF 400–450 Code Description Limitation Action Connec- tion and compo- nent Diag- nostic menu Function group 16 Cable harness error CAN-net segment 6. No limita- tion. Use diagnostic menu to lo- calise incorrect segment. Varies de- pending on ma- chine con- figuration. CAN/ POWER, menu 2 11.6.2 Redun- dant CAN bus 17 Cable harness error CAN-net segment 7. No limita- tion. Use diagnostic menu to lo- calise incorrect segment. Varies de- pending on ma- chine con- figuration. CAN/ POWER, menu 2 11.6.2 Redun- dant CAN bus 18 Cable harness error CAN-net segment 8. No limita- tion.

Use diagnostic menu to lo- calise incorrect segment. Varies de- pending on ma- chine con- figuration. CAN/ POWER, menu 2 11.6.2 Redun- dant CAN bus 21 Communication er- ror with Control unit transmission (D793) Gear selec- tion not working. Use diagnostic menu to check communication. Check the wiring between control unit, cab (D790-1) and control unit, transmis- sion (D793). D790-1/ K13:1, K13:2 CAN/ POWER, menu 3 11.6.3 CAN- bus drivetrain 22 Communication er- ror with Control unit engine (D794) Engine does not respond to com- mands from the cab. Use diagnostic menu to check communication. Check the wiring between control unit, cab (D790-1) and control unit, engine (D794).

D790-1/ K13:1, K13:2 CAN/ POWER, menu 3 11.6.3 CAN- bus drivetrain 23 No set-up file in control system. No controls in cab work- ing. Turn the ignition off and on. Perform software down- load to Control unit cab (D790-1). – – 11.5.3.1 Con- trol unit cab 24 Voltage feed to cab fan below 18 V. Cab fan not working. Check fuse F58-5:C3. D790-1/ K2:8 – 9.4.3 Cab fan 25 Interference during software download – Turn the ignition off and on. Perform software down- load again. D794 – 11.5.3.10 Control unit engine 26 Interference during software download – Turn the ignition off and on. Perform software down- load again. D794 – 11.5.3.10 Control unit engine