Kaiyi UDRF01.04GB — Error codes machine

D Error codes – 8 Control system 59 UDRF01.04GB Maintenance manual DRF 400–450 Code Description Limitation Action Connec- tion and compo- nent Diag- nostic menu Function group 41 Transistor has been triggered due to short circuit or open circuit in circuit for Wiper motor, rear (M650). Windshield wiper rear not working. Check cabling between the control unit and component with diagnostic menu. Check component. D790-1/ K2:4 – M650-2 CAB, menu 3 9.5.7 Wiper motor rear 42 Transistor has been triggered due to short circuit or open circuit in circuit for Rotating beacon (H428). Rotating beacon not working. Check cabling between the control unit and component with diagnostic menu. Check component.

D790-1/ K2:5 – H428 LIGHTS, menu 9 9.6.9 Rotating beacon 43 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for Work lights cab (H404). Work lights cab not working. Check cabling between the control unit and component with diagnostic menu. Check component. D790-1/ K2:6 – H404-1 LIGHTS, menu 1 9.6.10 Work lights cab 44 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for Work lights cab (H404). Work lights cab not working. Check cabling between the control unit and component with diagnostic menu. Check component.

D790-1/ K2:7 – H404-2 LIGHTS, menu 1 9.6.10 Work lights cab 45 Transistor has been triggered due to short circuit or open circuit in circuit for Wiper motor front (M650). Windshield wiper front not working. Check cabling between the control unit and component with diagnostic menu. Check component. D790-1/ K2:1 – M650-1 CAB, menu 2 9.5.1 Wiper front 46 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for Cab fan (M675). Cab fan not working. Check cabling between the control unit and component with diagnostic menu. Check component.

D790-1/ K2:2 – M675-1/2 CLI- MATE, menu 6 9.4.3 Cab fan 55 Transistor has been triggered due to short circuit or open circuit in circuit for background light- ing in switches and instruments. Reduced or no back- ground light- ing in instruments and controls. Check bulbs for background lighting, change if needed. Check the wiring to the background lighting. D7901/ K6:1, K 8:15, K 9:2, K 10:5, all inputs type A Digital in LIGHTS, menu 13 9.1 Controls and instru- ments