D Error codes – 8 Control system 67 UDRF01.04GB Maintenance manual DRF 400–450 Code Description Limitation Action Connec- tion and compo- nent Diag- nostic menu Function group 136 Signal error from Sensor hydraulic pressure lift cylin- der right (B768-11). Overload system not working. All lift functions operate at reduced speed. Error code 150 ac- tivated. Check cabling between the control unit and component with diagnostic menu. Check component. D797-F/ K1:24 – B768-11 OP, menu 3 7.2.9 Sensor hydraulic pressure lift cylinder 137 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for solenoid valve boom up (Y6005). Lift not work- ing.
Check cabling between the control unit and component with diagnostic menu. Check component. D797-F/ K1:16 – Y6005 BOOM, menu 4 7.2.3 Control valve lift, low- er and exten- sion 138 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for solenoid valve boom down (Y6004). Lower not working. Check cabling between the control unit and component with diagnostic menu. Check component. D797-F/ K1:17 – Y6004 BOOM, menu 5 7.2.3 Control valve lift, low- er and exten- sion 139 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for solenoid valve boom out (Y6006). Extension out not working.
Check cabling between the control unit and component with diagnostic menu. Check component. D797-F/ K1:18 – Y6006 BOOM, menu 7 7.3.3. Control valve lift, low- er and exten- sion 140 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for solenoid valve boom in (Y6007). Extension in not working. Check cabling between the control unit and component with diagnostic menu. Check component. D797-F/ K1:19 – Y6007 BOOM, menu 8 7.3.3. Control valve lift, low- er and exten- sion