D Error codes – 8 Control system 75 UDRF01.04GB Maintenance manual DRF 400–450 Code Description Limitation Action Connec- tion and compo- nent Diag- nostic menu Function group 222 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for solenoid valve cab tilt down (Y6048). Cab tilt not working. Check cabling between the control unit and component with diagnostic menu. Check component. D797-O/ K1:33 – Y6048 SLIDING CAB, menu 4 9.10 Cab structure and suspension 223 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for solenoid valve disengage- ment of hydraulic oil pumps (Y6057).
Disengage- ment of hy- draulic oil pumps when lowering cab tilt not work- ing. Check cabling between the control unit and component with diagnostic menu. Check component. D797-O/ K1:7 – Y6057 HYD, menu 6 9.10 Cab structure and suspension 237 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for solenoid valve cab forward/ up (Y6016). Hydraulic sliding cab or cab lift not working. Check cabling between the control unit and component with diagnostic menu. Check component.
D797-O/ K1:16 – Y6016 SLIDING CAB, menu 3 9.10 Cab structure and suspension 238 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for solenoid valve cab back- ward/down (Y6017). Hydraulic sliding cab or cab lift not working. Check cabling between the control unit and component with diagnostic menu. Check component. D797-O/ K1:17 – Y6017 SLIDING CAB, menu 4 9.10 Cab structure and suspension 239 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for solenoid valve steering left (Y636L). Joystick steering or mini-wheel not working. Check cabling between the control unit and component with diagnostic menu. Check component.
D797-O/ K1:18 – Y636L EL- STEER- ING, menu 4 5.2.10 Con- trol valve op- tion frame 240 Transistor has been triggered due to short-circuit or open circuit in cir- cuit for solenoid valve steering right (Y636R). Joystick steering or mini-wheel not working. Check cabling between the control unit and component with diagnostic menu. Check component. D797-O/ K1:19 – Y636R EL- STEER- ING, menu 5 5.2.10 Con- trol valve op- tion frame