8 0 Complete machine – Complete machine page Troubleshooting hydraulic hoses WARNING Oil under high pressure! Personal injury! Always depressurize hydraulic and brake systems before starting to work on the systems. 1 Depressurize the hydraulic and brake systems, see section B Safety . 2 Study the relevant hydraulic diagram, check between whichev- er components the suspect hose is connected and correspond- ingly where it is spliced. 3 Locate the hose on the machine. Start at one component and follow the hose to the next com- ponent. 4 Inspect the entire hose and splicing points with respect to chaf- ing damage, pinching damage and leaks. Change damaged hoses.
When removing a hydraulic hose, change of O-ring is always recommended on the hoses that have these (ORFS). UDRF01.04GB Maintenance manual DRF 400–450