1 Engine – 1.8 Lubrication 21 Do not tighten the oil plug with higher tightening torque, the threads will be damaged. 10 Fill with engine oil. For volume and grade, see section F Tech- nical data . 11 Start the engine, let it idle and check that the drain plug and fil- ters do not leak. 12 Turn off the engine and check the oil level, see Oil level, check- ing page 23 . Top up if needed. 13 Remove the collection container, handle the engine oil and fil- ters as environmentally hazardous waste. page Oil and oil filter, change (engine alternative Cummins) CAUTION Avoid skin contact with the oil, use protective gloves. Hot oil may cause burns, rashes and irritation! 1 Run the engine until warm.
2 Machine in service position, see section B Safety . 3 Remove the protective plates over the oil filling point for the en- gine and transmission. 4 Place a receptacle underneath the engine. 5 Remove the drain plug on the engine and drain the engine of oil. 6 Place a receptacle under the oil filters. 7 Clean the area around the oil filters. UDRF01.04GB Maintenance manual DRF 400–450