Kaiyi UDRF01.04GB — 2.3 Mechanical transmission

6 2 Transmission – 2.3 Mechanical transmission 2.3 Mechanical transmission page Mechanical transmission, description The transmission is built with all gears in constant mesh. It is shifted through hydraulic pressurizing of clutch discs for each one of the gears. The clutch discs connect the input shaft with the main shaft or tubular shaft, depending on which gear has been selected. Shift- ing takes place without disengaging the transmission from the en- gine. The clutches for FORWARD and REVERSE are modulated electro-hy- draulically, which means that the clutch pressure builds up gradual- ly.

This allows shifting between FORWARD and REVERSE, and vice versa, while operating at a speed lower than set limit value, see sec- tion 8 Control system , group 8.5.1.5 DRIVETRAIN . Modulation also gives smooth shifting between FORWARD and REVERSE. High modulation (that is, soft operation/intensive slipping between gear positions) results in high transmission wear and high oil tem- perature. The sensor for oil temperature generates a warning when the oil gets warmer than 120 ° C. If the oil temperature sensor indi- cates 125 ° C, the transmission’s function ceases. There are four gears in each direction for the transmission.

A clutch (disengagement) function is operated with a separate clutch pedal that starts to function at a certain brake pressure. The electric shifting system is either manual or automatic. For position of components see Transmission, component position page 4 . UDRF01.04GB Maintenance manual DRF 400–450