Kaiyi UDRF01.04GB — 2.8 Control system transmission

2 Transmission – 2.8 Control system transmission 13 7 Select DRIVE-TRAIN, menu, 3. GEARBOX TUNING Description: Calibration of transmission couplings. 8 Check that the gear control is in neutral position. 9 Start calibration by pressing Enter. UDRF01.04GB Maintenance manual DRF 400–450 000081 CALIBR DRIVE-TRN 3(4) CLUTCH TUNING PHASE X SUB-PH X CLUTCH X STATUS X ACTION X XXXXrpm PHASE: Indicates current phase in the calibration. 0. Prefilling of coupling 1. Calibration of coupling 4. Calibration complete 5. Calibration incorrect CLUTCH: Indicates which clutch shall be calibrated. F. Clutch forward R. Clutch reverse 1. Clutch gear 1 2. Clutch gear 2 3. Clutch gear 3 4. Clutch gear 4 ACTION:

Indicates action from mechanics (in the event of a fault) 0. No action (normal condition if no fault). 1. Increase throttle application. 2. Reduce throttle application. 3. Select neutral position. 4. Select travel direction forward. 5. Stop the vehicle. (Press the brake if the machine starts to move.) 6. Heat the transmission, see step 4. 7. No action, the engine is controlled via the transmis- sion control unit. 8. Keep the accelerator pedal in its current position. 9. Check error codes. SUB-PH: Internal value for sub-phase 1 or 0. STATUS: Calibration status. 0. Calibration not in progress. 3. Calibration in progress