BAIC — BAIC Comanche Service Manual: Comprehensive Guide for PA-24 Series Aircraft

~21i41N -----I --- PIPER COMANCHE SERVICE MANUAL 'Ie r 3 4 IN SOLDER SOFT WIRE CAM WASHE~ TIMING MARK FIGURE 7-11. MAGNETO TIMING MARKS FIGURE 7-12. TIMING POINTER 7-43. AdjUICIIICDt Of R.crardIIftsker 'aiDa. -200 series mapetoS. &. Install timing plate and pointer Oft IftIIMtOs without UDUnI marks cut in the breaker compartment (refer to Fipre 7-13) or just the pointcr on rnqnctOl with tizninI marks cut in the breaker compartment. (Refer to Fifure 7-14.) NOTE A timing kit. including timing plate. etc .. may be purchased thfOUlh the eftJine or rnqneto manufacturer. A pointer may be fonned as shown in Figure 7·12.

NOTE A pointer cao a1so be made by wrappq a piece of soft wire tilhtly around the bead of cam securin, screw and. bending it to extcnd over timing marks. b. Find neutral position of the magneto drive by roa.an, drive coup lint in a left hand direction \ann} the red or white chamfered tooth Oft the distributor drive par appcan throUJh the timin, inspection hole. At the same location. the drive should feel to have fallen into a notch or neutral position. a c. Hold the mapeto drive in the neutral position and bend the cimini pointer until it indicates 0 on the timins plate or in the breaker compartment. 2 810 POWER PLANT ISSUED: 1/18172