BAIC — BAIC Comanche Service Manual: Comprehensive Guide for PA-24 Series Aircraft

PIPER COMANCHE SERVICE MANUAL 9-102. Navipcion Uplts. 9-103. Remova! Of Win, Navipdon Licht. a. To remove bulb. remove the screws securing the plexiIW window. b. R~ove screws securing the lens rcuiner. c. Remove lens and bulb. NOTE To remove the complete lamp assembly. the win, tiP must be removed. 9-104. InsWlarion Of WIn, NaYipaon Licht. a. Install bulb, lens and lens retainer and secure with appropriate screws. b. Place plexiglu window in position on wina tip and secure with appropriate screws. 9-10S. Removal Of Tail Navipdon Uplt. a. To remove bulb. remove the screws securi", the Iirht IIMIftbly to tbe rudder tip and remove the lens. b. Remove the bulb.

NOTE To remove the complete light assembly unsolder the elcetrieallud from the base of the Iilht assembly and disconnect: the remainin. electrical lead at the connector. 9-106. Installacion Of Tail Navipdon Litht. a. Install bulb and lens in light uscmbly. b. Place light assembly in position on rudder tip and secure with appropriate screws. 9·107. Removal Of Lamp In And Win, Tip StrObe LiFt. The lights arc located in both winl tips next to the navigationallighu. a. Remove the screws securing the plcxiglu window to the wing tip and removc window. b. Remove the scrcw securing the ftavitacionaJ light cover and remove eever, c.

Remove the three screws securing navigational lifht btSekct uicmbly and rcmove light assembly. d. Remove the Strobe lamp by cutting the wim on thc lamp beneath the mounting bracket. e. Remove zhe defective lamp. f. Remove and discard the plug with the cut wires from the electrical socket. ELECTRICAL SYSTEM ISSUED: 8/18/72 3 C24