PIPER COMANCHE SERVICE MANUAL TABLE IX· VII. TROUBLESHOOTING (cont) ELECTRICAL SYSTEM ISSUED: tl/1817~ 3 F4 Troubl~ Couse R.m~dy ~Iotor fails to operate. (cont) Grounded or open field circuit. Test, repair if possible or replace with a new part. Low motor and cranking speed. Worn, rough, or improperly lubricated motor or starter gearing, Same electrical causes as listed under "Motor fails to operate". Disassemble, clean, inspect, and relubricate, replacing ball bearings if worn, Same remedies listed for these troubles, Excessive arcing of motor brushes. Binding, worn, or improperly seated brush or brushes with excessive side play. Dirty commutator, rough, pitted, or scored.
II See information above dealing with this trouble. I i i Clean as outlined above. I I Excessive wear and arcing of motor brushes. Rough or scored com- mutator. Armature assembly not coneentri c. Remove and turn commutator down on a lathe. Reface commutator.