STRUCTURE, FUNCTION AND MAINTENANCE STANDARD HSS MOTOR Outline Pressurized oil sent from pump is converted to rotation torque and is transmitted to output shaft. Structure Cylinder block (5) is supported to shaft (1) by a spline (15), and shaft (1) is supported by main and sub bearings (17) and (14). The end of piston (4) has a concave ball shape, and shoe (16) is caulked to it to form one unit. Piston (4) and shoe (15) form a spherical bear- ing. Piston (4) carries out motion relative to the axial direction inside each cylinder chamber of cylin- der block (5).
Cylinder block (5) carries out rotation relative to valve plate (6) while sealing the pressurized oil, and this surface ensures that the hydraulic bal- ance is maintained correctly. The oil inside each cylinder chamber of cylinder block (5) is sucked in and discharged through valve plate (6). 10-62 D85EX-15