Komatsu — HSS MOTOR

STRUCTURE, FUNCTION AND MAINTENANCE STANDARD HSS MOTOR OPERATION OF BRAKE VALVE The brake valve consists of check valve (12), counterbalance valve (10), and safety valve and (11), and forms a circuit such as that shown below. The function and operation of each component is as given below. The pressurized oil at the side where the oil is being supplied flows from orifice E1 of spool (10) into chamber S1 . And when the pressure in chamber S1 bcomes greater than the spool switching pressure, spool (10) is pushed to the right. In this way, port MB and port PB are connected, so the outlet port side of the HSS motor is opened and the HSS motor starts to turn. 1.

Counterbalance valve, check valve Function When operation the steering on slopes, the weight on the machine produces a force in the downward direction which makes the machine try to turn faster than the speed of the HSS motor. Because of this, if the engine is run at low speed and the steering is operated, the HSS motor will overrun, and this will create an extremely dan- gerous condition. To prevent this, this valve is installed to carry out the steeting in accordance with the engine speed (pump discharge volume). Operation when oil is supplied When the steering lever is operated, the pressur- ized oil from the control valve is supplied to port PA .

It pushes open check valve (12a), and flows from HSS motor inet port MA to HSS motor out- let port MB . However, the outlet port side of the HSS motor is closed by check valve (12b) and spool (10), so the pressure at the side where the oil is being supplied rises. 10-64 D85EX-15