STRUCTURE, FUNCTION AND MAINTENANCE STANDARD HSS MOTOR 2. Safety valve Function When the operation of the steering stops, coun- terbalance valve (10) closes the circuit at the inlet and outlet ports of the HSS motor. But the HSS motor continues to turn because of inertia. As a result, the pressure at the outlet port of the HSS motor becomes extremely high, and this will damage the HSS motor and the piping. The safety valve acts to release this abnormal pressure to the inlet port of the HSS motor to protect the equipment from damage.
If the pressure in chamber E (or chamber F ) goes above the set pressure, the force of /4 (D1 2 – D2 2 ) x pressure resulting from the differ- ence in area of D1 and D2 (or the force of /4 (D3 2 – D1 2 ) x pressure resulting from the differ- ence in area of D3 and D1 ) becomes greater than the force of the spring and moves the pop- pet to the right. The oil then flows to chamber F (or chamber E ) in the circuit on the opposite side. Operation When the operation of the steering is stopped, the check valve of the counterbalance valve closes chamber E (or chamber F ) in the outlet port circuit, but the pressure at the outlet port side continues to rise because of inertia. 10-66 D85EX-15