STRUCTURE, FUNCTION AND MAINTENANCE STANDARD BEVEL GEAR SHAFT, HSS, BRAKE Operation of HSS 1. Steering lever at neutral Traveling in the straight line When the steering lever is at the neutral position, HSS motor is stopped, and the rotation of the trans- fer gear and left and right gears A (13) in the plane- tary system is also stopped. In this condition, the power from bevel gear shaft (16) is input to ring gear (22), and is transmitted to through planet any pinion (21), planetary pinion shaft (23) and carrier (25). It is then transmitted to output shaft (1) through brake inner drum (12), and brake hub (5).
Therefore, the output speed on the left and right sides in the same, and the machine travles in a straight line. Direction of rotation of HSS motor Steering lever position Neutral Directional lever position * 1. Neutral Reverse Any position Direction of rotation of HSS motor as seen from left of machine Clockwise Clockwise Does not rotate * 1. Pivot turn 10-78 D85EX-15 Left steering Right steerin l Forward Reverse *1. Neutral Forward Counter- Clockwise clockwise Counter- Counter- clockwise clockwise