STRUCTURE, FUNCTION AND MAINTENANCE STANDARD COOLING FAN PUMP Function The rotation and torque of the engine are trans- mitted to the shaft of this pump and converted into hydraulic energy in this pump. This pump discharges the pressurized oil according to the load. The discharge of this pump can be changed by changing the swash plate angle in it. The end of piston (6) has a spherical hollow which is combined with shoe (5). Piston (6) and shoe (5) form a spherical bearing. Rocker cam (4) has plane A . Shoe (5) is kept pressed against plane A and slid circularly. Rocker cam (4) slides around ball (11). Piston (6) in each cylinder of cylinder block (7) moves relatively in the axial direction.
Cylinder block (7) rotates relatively against valve plate (8), sealing the pressurized oil, and the hydraulic balance is maintained properly. The oil in each cylinder of cylinder block (7) can be sucked and discharged through valve plate (8). Structure Cylinder block (7) is supported on shaft (1) through spline a . Shaft (1) is supported by the front and rear bearings. 10-120 D85EX-15