Komatsu — COOLING FAN MOTOR

STRUCTURE, FUNCTION AND MAINTENANCE STANDARD COOLING FAN MOTOR 2. Suction valve (2) When pump is stopped If the engine is stopped and the input revolu- tion of the fan pump lowers to 0 rpm, the hydraulic oil from the pump is not supplied to port P any more. As the hydraulic oil is not supplied to the MA side of the motor, the motor speed lowers gradually to stop. If the motor shaft is revolved by the force of inertia while the oil flow in the port P is reduc- ing, the oil in port T on the outlet side is sent by the suction valve (1) to the MA side to prevent cavitation. Function If the fan pump stops, the hydraulic oil does not flow into the motor.

Since the motor continues revolution because of the force of inertia, how- ever, the pressure on the outlet side of the motor rises. When the oil stops flowing in from inlet port P , the suction valve sucks in the oil on the outlet side and supplies it to the port MA where there is not sufficient oil to prevent cavitation. Operation (1) When pump is started If the hydraulic oil from the pump is supplied to port P and the pressure on the MA side rises and starting torque is generated in the motor, the motor starts revolution. The oil on the outlet MB side of the motor returns through port T to the tank. D85EX-15 10-129