Komatsu — STANDARD VALUE TABLE FOR CHASSIS

TESTING AND ADJUSTING STANDARD VALUE TABLE FOR CHASSIS D85EX-15 20-5 (2) Machine model D85EX, PX-15 Category Item Measurement conditions Unit Standard value for new machine Service limit value HSS pressure Relief pressure • Hydraulic oil temperature: Within operating range • Engine: High idling MPa {kg/cm2} 38.2 – 41.7 {390 – 425} 38.2 – 41.7 {390 – 425} LS pressure (Lood sensing pressure) 36.2 – 38.1 {369 – 389} 36.2 – 38.1 {369 – 389} Performance of power train Travel speed • Flat road • Engine water temperature: Within operating range • Torque converter oil temperature: Within operating range • Engine: High idling • Run up distance: 10 – 30m • Measuring distance:

20m EX F1 km/h 3.6 ± 0.2 3.6 ± 0.2 F2 6.1 ± 0.3 6.1 ± 0.3 F3 10.1 ± 0.5 10.1 ± 0.5 R1 4.7 ± 0.2 4.7 ± 0.2 R2 8.0 ± 0.4 8.0 ± 0.4 R3 13.0 ± 0.7 13.0 ± 0.7 PX F1 km/h 3.8 ± 0.2 3.8 ± 0.2 F2 6.7 ± 0.3 6.7 ± 0.3 F3 11.2 ± 0.6 11.2 ± 0.6 R1 4.9 ± 0.2 4.9 ± 0.2 R2 8.7 ± 0.4 8.7 ± 0.4 R3 14.9 ± 0.7 14.9 ± 0.7 Work equipment oil pressure Unload pressure • Hydraulic oil temperature: Within operating range • Unload pressure: Set all equipment in neutral. • Relief pressure: Set cylinder to stroke end. • LS pressure: Set cylinder to stroke end. Engine: Low idling MPa {kg/cm2} — — Engine: High idling 2.45 +1.37 0 +14 {25 } 0 2.45 +1.37 0 +14 {25 } 0 Blade lift relief pressure Engine:

Low idling 21.6 ± 1.18 {220 ± 12} 22.54 ± 1.18 {230 ± 12} Engine: High idling 22.54 ± 1.18 {230 ± 12} 22.54 ± 1.18 {230 ± 12} Blade tilt relief pressure Engine: Low idling 21.6 ± 1.18 {220 ± 12} 22.54 ± 1.18 {230 ± 12} Engine: High idling 22.54 ± 1.18 {230 ± 12} 22.54 ± 1.18 {230 ± 12} Ripper lift relief pressure (for EX) Engine: Low idling 22.54 ± 1.18 {230 ± 12} 22.54 ± 1.18 {230 ± 12} Engine: High idling 22.54 ± 1.18 {230 ± 12} 22.54 ± 1.18 {230 ± 12} LS pressure (Load sensing pressure) Engine: Low idling 20.2 ± 0.98 {206 ± 10} 20.2 ± 0.98 {206 ± 10} Engine: High idling 20.2 ± 0.98 {206 ± 10} 20.2 ± 0.98 {206 ± 10} Control circuit main pressure (HSS, PPC, fan) • Hydraulic oil temperature:

Within operating range • Engine: High idling MPa {kg/cm2} +0.49 3.97 0 {40.5 +5} 0 +0.49 3.97 –0.20 {40.5 +5} –2 PPC valve output pressure 3.82 – 4.12 {39 – 42} 3.82 – 4.12 {39 – 42}