TESTING AND ADJUSTING MEASURING FUEL PRESSURE MEASURING FUEL PRES- SURE 3. Run the engine at high idling and measure the fuel pressure. a For the standard value, see Troubleshooting when error code is displayed (Error code AD10L3). a Measuring instrument for fuel pressure a Measure only the fuel pressure in the low-pres- sure circuit from the feed pump to the fuel filter and fuel supply pump. Since the pressure in the high-pressure circuit from the fuel supply pump to the common rail and fuel injector is very high, it cannot be mea- sured. 4. After finishing measurement, remove the mea- suring instruments and return the removed parts. 1.
Open the left side cover of the engine and remove fuel pressure pick-up plug (1). 2. Install nipple [1] of hydraulic tester F1 and con- nect them to hydraulic tester F2 . 20-120 D85EX-15 (1) Symbol Part No. Name F 1 799-101-5002 Hydraulic tester 790-261-1203 Digital hydraulic tester 2 799-401-2320 Hydraulic tester (1.0MPa {10kg/cm2})