TESTING AND ADJUSTING BLEEDING AIR FROM FUEL CIRCUIT BLEEDING AIR FROM FUEL CIRCUIT a Bleeding the air as follows if the engine has run out of fuel or the fuel circut equipment has been removed and installed. 1. Remove fuel filter (1), fill with fuel, then install again. a When filling, use clean fuel and be careful not to let dirt get in. a Add fuel through inlet port portion a (8 places) of the filter. Portion b is the outlet port (clean side) after the fuel has been fil- tered, so never add fuel from hear. a If clean fuel is not available, do not remove the filter. Operate the priming pump to fill the filter with fuel. D85EX-15 20-121 (1)