TESTING AND ADJUSTING ADJUSTING FUEL CONTROL DIAL AND DECELERATOR PEDAL ADJUSTING FUEL CONTROL DIAL AND DECELERATOR PEDAL 2. Preparation work 1) Start the engine, set the monitor panel in the "Adjustment mode", and prepare for measur- ing the engine speed. a For the method of operation, see "Spe- cial functions of monitor panel (EMMS)". Adjustment code: 0007 (Engine deceler- ation cut mode) a The engine speed is displayed in 1 rpm. 1. Outline of fuel control system The following signals are input as rotation command signals to the engine controller.
Fuel control dial potentiometer signal Decelerator pedal potentiometer signal 3rd throttle signal The engine controller controls the fuel control system of the engine (CRI system) according to the one of the above input signals having the lowest engine speed. Adjust the deceleration slow rotation by adjusting the decelerator pedal linkage. [1] Fuel control dial [2] Engine controller [3] Steering and transmission controller [4] Decelerator pedal [5] Decelerator pedal potentiometer [6] Engine (CRI system) [7] 3rd throttle signal [8] Rod 20-126 D85EX-15 (1)