Komatsu — ADJUSTING FUEL CONTROL DIAL AND DECELERATOR PEDAL

TESTING AND ADJUSTING ADJUSTING FUEL CONTROL DIAL AND DECELERATOR PEDAL 3. Adjusting decelerator pedal engine speed With the fuel control dial in the high idling posi- tion, press decelerator pedal (1) to stopper bolt (2) and check that the decelerator pedal engine speed is normal. Decelerator pedal engine speed: 1,000 – 1,050 rpm a If the decelerator pedal engine speed is abnormal, adjust installed dimension a of stopper bolt (2). Standard installed dimension a of stopper bolt: 19 mm 4. High idling engine speed Set the fuel control dial in the high idling position and check that the high idling engine speed is normal. High idling engine speed:

2,050 – 2,100 rpm Standard installed dimension b of stopper bolt: 6 mm a If the engine speed is abnormal, perform the following. When the engine speed is above 1,950 rpm: Lower the engine speed below 1,900 rpm temporarily with stopper bolt (3) to eliminate the play of the decelerator pedal, and then adjust the engine speed to the high idling speed. When the engine speed is below 1,950 rpm: Adjust the engine speed to the high idling speed with stopper bolt (3). D85EX-15 20-127 (1)